What laser texture paper does in a rolling mill
Laser texture paper is a thin pattern sheet that transfers its design to metal as the metal and paper pass together through a rolling mill. Pepetools and Rolling Mill Resources partnered to produce an exclusive set of these patterns, sold in packs of 10 of a single design. Each sheet is rated for one or two uses per roll, so plan your passes accordingly.
The paper is the pattern source, not a finished texture plate. You choose a design, sandwich it with your metal, and let the mill's pressure emboss the pattern into the surface. The result is a repeatable motif you can use across a series of pieces.
The Laser Texture Paper pack at a glance
- Laser Texture Paper for Rolling Mills (Pack of 10): Exclusive patterns come in a pack of 10 sheets of one design. Buying a pack gives you multiple attempts with the same motif, which is useful when you are learning how the paper behaves in your mill.

Laser Texture Paper for Rolling Mills (Pack of 10) - Laser Texture Paper for Rolling Mills (Pack of 10): Laser paper is good for one or two uses per roll. Plan each sheet as a limited resource; test on scrap before committing a fresh sheet to a final piece.
- Laser Texture Paper for Rolling Mills (Pack of 10): Design options include Repeating Spirals, Sea Fan, Spiral Shapes, Mandala Shapes, Mayan Design Shapes, Japanese Garden Shapes, Fossil Shell Shapes, Diatom Shapes, Ring Bands 2, Ring Bands 10, Honeycomb, and Indian Leaf. The pattern should suit the shape of your finished piece, so choose a design that fits the scale and form of your work.
How to emboss metal with laser texture paper
The supplied record does not include mill settings, pressure recommendations, or metal thickness limits. The steps below cover the parts of the process the record supports; check your mill's own instructions for roller gaps and safe operation.
- Choose a pattern that fits the piece: Pick one design from the pack options, such as Honeycomb for an allover texture or Ring Bands 2 for a banded effect. A pack of 10 gives you repeated sheets of the same pattern.
- Cut a test piece of metal: Use scrap metal of the same type and thickness as your final piece. The record does not specify compatible metals, so confirm your metal suits rolling mill embossing before you begin.
- Sandwich the paper and metal: Place the laser paper against the metal face you want to texture. The record does not describe a required backing or carrier, so follow your mill's guidance for feeding materials.
- Roll the sandwich through the mill: Pass the paper and metal through together. The paper transfers its pattern under the mill's pressure. Because each sheet is good for one or two uses, treat the first pass as a trial and inspect the result.
- Inspect and decide on a second pass: If the texture is too shallow, the record allows up to two uses per sheet. A second pass with the same sheet may deepen the pattern, but check the paper for wear first.
- Repeat with a fresh sheet for a new piece: Once a sheet has been used once or twice, retire it. A pack of 10 gives you multiple sheets for a small run of matching pieces.
Choosing a pattern for your project
The pack options cover geometric, organic, and banded motifs. Match the pattern to the scale of your piece and the effect you want.
- For allover texture: Honeycomb, Repeating Spirals, or Interlocking Circles can cover a broad area evenly. These suit backgrounds or large flat pieces.
- For focal or shaped designs: Mandala Shapes, Mayan Design Shapes, or Japanese Garden Shapes read as discrete motifs rather than an allover pattern. Use them where the design should stand out.
- For ring bands and narrow strips: Ring Bands 2 and Ring Bands 10 are named for band-style patterns, which can suit ring blanks or strip work.
- For organic and nature-inspired looks: Sea Fan, Fossil Shell Shapes, Diatom Shapes, and Indian Leaf offer botanical or marine motifs for jewelry with a natural theme.
What the supplied information does not cover
The record does not list compatible metals, required roller gap settings, pressure recommendations, or a cleaning procedure for the paper. It also does not state whether the paper can be used with a texture plate or only directly against the metal. Treat these as open questions and check your rolling mill's manual or test on scrap before committing a sheet to a final piece.
Because each sheet is limited to one or two uses, a failed test costs you part of a pack. Testing on scrap with a single sheet first is the most reliable way to learn how the paper behaves in your specific mill.
Getting the most from a pack of 10
A pack of 10 gives you repeated sheets of one design, which is enough for a small production run or for practice. If you want to try several patterns before committing to a full pack, the record mentions a master pack of all patterns available separately. For a single project with a consistent motif, one design pack keeps your texture uniform across pieces.
Store unused sheets flat and dry. The record does not specify storage conditions, but keeping the paper uncreased helps it feed evenly through the mill.

