Plan your bench around the DDS-015 footprint
The Arbe DDS-015 is a down draft single spindle polishing machine with a built-in dust collection system. Before you set it up, check that your bench can accommodate its dimensions: 18 1/4” W x 19” D x 16 1/2” H. The shipping weight is 75 lbs, so you'll want a sturdy surface that won't flex under the machine's operation.
Because the unit pulls dust downward through the polishing wheel, place it where you can easily access the filter compartment underneath. The down draft design lets you change the filter without tools, but you still need clearance to slide the filter out. Also confirm that the 110V outlet you plan to use is compatible with the plug you select; the machine is available in 110V or 220V, and Pepetools will email you to confirm the plug type for 110V orders. For 220V, allow an additional week for processing.
DDS-015 dimensions and electrical options
- Arbe Polishing Machine - Down Draft Single Spindle Polishing Machine 110v/60Hz/1Ph DDS-015: Dimensions: 18 1/4” W x 19” D x 16 1/2” H. Ensures the machine fits your bench and leaves room for filter access.

Arbe Polishing Machine - Down Draft Single Spindle Polishing Machine 110v/60Hz/1Ph DDS-015 - Arbe Polishing Machine - Down Draft Single Spindle Polishing Machine 110v/60Hz/1Ph DDS-015: Available in 220V, please select the option you would like in 110V and we will email you to confirm which plug you would like, 220V takes an additional week to process Helps you plan for lead time and confirm the correct plug for your shop.
Choose between single speed and variable speed
The DDS-015 comes in two motor options: Single Speed Motor (110V) and Variable Speed Motor (110V). Both use a 1/2 HP motor and a 465 CFM suction blower. The single speed model runs at one set speed, while the variable speed model lets you adjust the speed to suit different polishing tasks. Your choice depends on whether you prefer simplicity or control. If you often switch between different materials and wheel sizes, variable speed can be helpful. If you want a straightforward setup, single speed is sufficient.
Motor and blower specifications
- Arbe Polishing Machine - Down Draft Single Spindle Polishing Machine 110v/60Hz/1Ph DDS-015: 1/2 HP Motor. Indicates the power available for polishing and dust collection.
- Arbe Polishing Machine - Down Draft Single Spindle Polishing Machine 110v/60Hz/1Ph DDS-015: 465 CFM Suction Blower. Shows the air volume the blower can move, which affects dust capture.
Set up the machine on your bench
- Position the machine: Place the DDS-015 on a sturdy bench with enough clearance around it for the 18 1/4” W x 19” D footprint. Ensure the filter access underneath is unobstructed.
- Connect power: Plug the machine into a compatible 110V outlet. If you ordered the 220V option, use a 220V outlet and confirm the plug type with Pepetools.
- Check the filter: The down draft design allows tool-free filter replacement. Make sure the filter is properly seated before use.
- Test the suction: Turn on the machine and verify that air is being drawn down through the polishing wheel area. The 465 CFM blower should provide strong suction.
Use the down draft system effectively
The DDS-015's down draft design pulls dust and debris away from your work area and into the filter. This helps keep your breathing zone cleaner and reduces cleanup. To get the most from the system, position your work so that dust falls directly into the downdraft opening. The sealed and insulated cabinet helps contain dust, and the dual stage filtration captures particles before they reach the blower.
When it's time to change the filter, simply remove the old one and insert a new one—no tools required. The filter is located directly under the polishing wheel, so you can access it easily. Regular filter changes maintain suction power and efficiency.
Dust collection features
- Arbe Polishing Machine - Down Draft Single Spindle Polishing Machine 110v/60Hz/1Ph DDS-015: Down draft design enables user to change the filter located directly under the polishing wheel with out the use of any tools! Makes maintenance quick and easy, reducing downtime.
- Arbe Polishing Machine - Down Draft Single Spindle Polishing Machine 110v/60Hz/1Ph DDS-015: Dual stage filtration. Provides two levels of filtration to capture particles and protect the blower.
- Arbe Polishing Machine - Down Draft Single Spindle Polishing Machine 110v/60Hz/1Ph DDS-015: Sealed and insulated cabinets provide maximum dust collector efficiency. Helps contain dust and reduce noise from the blower.
Maintain suction and filter performance
To keep the DDS-015 working at its best, monitor the suction and replace the filter when you notice a decrease in airflow. The tool-free filter access makes this a simple routine. Because the machine is made in the USA and uses a squirrel cage blower, it's designed for durability, but regular filter changes are still necessary to protect the motor and maintain efficiency.
If you notice excessive dust escaping or reduced suction, check that the filter is properly installed and not clogged. The sealed cabinet should fit tightly; if it doesn't, inspect the seals. For electrical safety, always unplug the machine before performing any maintenance.
What the supplied information does not cover
The catalog details do not include specific operating speeds for the variable speed model, recommended polishing wheel types, or detailed electrical installation instructions. For those details, consult the manufacturer's documentation or a qualified electrician. Always follow local electrical codes and safety regulations.

