Back to Blog
How-to Guides 2026-11-14 Pepetools - Precision Engineered Professional Equipment 0 views

Extra-Wide LED Task Lamp with USB Port: Bench Lighting Setup

Extra-Wide LED Task Lamp with USB Port: Bench Lighting Setup

Set up the Pepetools extra-wide LED task lamp for jewelry work: mounting choices, articulating arm positioning, rheostat tuning, and USB port use at the bench.

Decide How the Lamp Attaches Before You Position It

The Pepetools extra-wide LED task lamp gives you two mounting routes, and that choice shapes everything else about your setup. You can screw the lamp permanently to your bench or work surface, or use the included mounting clamp, which fits edges up to 1-1/2" capacity. Screw hardware is not included, so plan for that if you want a fixed installation.

A clamped lamp can move with your workflow and leaves the bench top free of fastener holes. A screwed-down lamp stays put and suits a dedicated station where the light never needs to travel. Either way, secure the lamp before you adjust the articulating arm; the lamp weighs 9 lbs, and a stable base keeps the arm from shifting once you lock it.

Mounting and Reach at a Glance

Position the Head for Even Bench Coverage

  1. Mount the base at the edge or corner of your bench: Use the included clamp on an edge up to 1-1/2" capacity, or screw the base down if you want a permanent station. Leave room for the 6-foot power cord to reach an outlet without strain.
  2. Extend the articulating arm to cover your work zone: The arm reaches 32", so set the upright where the head can still travel over your main work area. Lock the fold-down clamp handles on the upright once the arm is where you want it.
  3. Aim the 24"-wide head across the bench: The 144 LED chips and built-in diffuser spread light across the work surface. Angle the head so the wide face covers the area you inspect, not just a single spot.
  4. Set brightness with the built-in rheostat: The rheostat adjusts output from very dim to maximum. Start low for close inspection and raise it for tasks that need more light across the bench.

Match Brightness and Color to the Task

The lamp's 6,000°K color temperature gives a cool, daylight-like cast that helps you judge color and surface detail. Output is adjustable through the rheostat, with a maximum equivalent of 80 watts and an LED lux range of 930–4,850 measured at 12". That range lets you dim the lamp for tasks where full output would wash out fine detail, then raise it when you need broad coverage.

Energy use stays modest: 28 watts consumption and 36 watts power output. The dual 110/220-volt, 50/60Hz, 0.25-amp power specification means the lamp is built for either voltage, but confirm your outlet and plug compatibility before connecting it.

Light Output and Power Details

Use the USB Port Without Cluttering the Bench

The built-in USB port lets you charge or power a smartphone, tablet, computer, or any USB-compatible accessory right at the bench. Route the device cable along the lamp's articulating arm or upright so it stays clear of your work surface and doesn't catch on tools.

The supplied information does not specify the USB port's power output or supported charging standards. Treat it as a convenience port for compatible accessories and check your device's requirements if charging speed matters to you.

Reduce Eye Strain During Long Sessions

  • Dim the rheostat for close inspection: The rheostat goes from very dim to maximum. Lower output for tasks where full brightness would glare off polished metal or stones.
  • Keep the diffused light between you and the work: The built-in diffuser spreads light evenly. Position the wide head so the balanced light falls across the work area rather than directly into your eyes.
  • Use the matte housing to your advantage: The non-glare, non-reflective matte finish on the aluminum body reduces reflections in your peripheral view.
  • Lock the arm so the light stays where you set it: The fold-down clamp handles on the upright lock the articulating arm in position, so the head doesn't drift during detailed work.

What to Confirm Before You Buy

The lamp is a substantial bench fixture at 9 lbs with a 24"-wide head, so measure your bench edge and overhead clearance before ordering. Confirm that your mounting edge is within the clamp's 1-1/2" capacity if you plan to clamp rather than screw down.

The supplied information does not cover bulb replacement, dimming compatibility with external controls, or USB charging specifications. If those details matter for your workflow, verify them with the manufacturer before purchase.

Related Articles

Customer Service
Home
Products
Cart
Profile