Blog

Torch Safety Basics: Gas Regulator Setup for Jewelry Soldering

Learn how to set up a gas regulator for jewelry soldering safely. Step-by-step guide covers pressure settings, leak checks, and torch igniter use.

Rolling Mill Care: Maintenance and Rust Prevention Steps

Keep your rolling mill accurate and rust-free with a simple routine: daily wipe-downs, correct lubrication, roller inspection, and smart storage.

How to Pick the Right Rolling Mill for Wire and Flat Stock

Match groove shape, roll width, gear ratio, and power to the stock you actually run. A practical rolling mill buying guide for jewelers choosing betwe...

Radial Discs and Polishing Pins: A 116-Piece Setup Guide

Set up a 116-piece radial disc and polishing pin kit for flex shaft work. Learn grit order, storage, and how to avoid cross-contamination.

Why Your Foredom Handpiece Overheats and How to Fix It

Diagnose why a Foredom handpiece overheats, from sheath drag to hammer-action friction, and learn when to lubricate, replace the sheath, or stop befor...

Permanent Jewelry Chain Buying Guide: Figaro, Disc & Dapped

Compare Figaro, disc, and dapped gold-fill chains for welded permanent jewelry. Learn which style suits which client, plus practical selection rules.

Rawhide vs. Metal Jewelers Mallets: Which Hammer to Choose

Compare rawhide and metal mallets on strike force, surface protection, and control so you can pick the right hammer for forming, stamping, and ring wo...

How to Set Up and Use a GEMORO Ultrasonic Cleaner

A step-by-step guide to setting up a GEMORO ultrasonic cleaner, choosing the right jewelry cleaning solution, and safely cleaning gold and silver jewe...