What This Connector Needs for a Secure Fit
The Petite Dog with Cat Silhouette Permanent Jewelry Connector is a small gold-filled charm designed to be attached to a chain. Its 1.0mm connector opening determines which jump ring will work. The supplied information recommends an 18-gauge or smaller jump ring for a snug fit that won't pull open under normal wear.
Connector Dimensions That Affect Attachment
- Petite Dog with Cat Silhouette Permanent Jewelry Connector - Gold Filled: It measures 10mm in height and 9.5mm in width, with a thickness of 0.5mm and a weight of 0.1 grams. It features a 1.0mm connector, allowing for secure attachment to a chain. The 1.0mm connector opening is the key measurement for choosing a jump ring. A ring that is too thick will not pass through; one that is too thin may not hold securely.

Petite Dog with Cat Silhouette Permanent Jewelry Connector - Gold Filled
How to Attach the Connector
Follow these steps to connect the charm to your permanent jewelry chain.
- Select the right jump ring: Use an 18-gauge or smaller jump ring. The 1.0mm connector opening is designed to work with this size. A larger gauge ring may not fit through the opening.
- Open the jump ring correctly: Use two pairs of pliers (chain-nose or flat-nose) to twist the jump ring open sideways. Do not pull the ends apart, which weakens the metal.
- Thread the jump ring through the connector: Slide the open jump ring through the 1.0mm connector opening on the charm.
- Attach to the chain: Thread the same jump ring through the last link of your permanent jewelry chain. Close the jump ring by reversing the twisting motion, ensuring the ends meet flush.
- Check the connection: Gently tug the charm to confirm the jump ring is fully closed and the connector is secure. If the ring gap is visible, re-close it more tightly.
What the Supplied Information Does Not Cover
The product record does not include welding settings, chain link size, or care instructions. For welding, refer to your permanent jewelry welder's manual. The 0.5mm thickness of this connector means it will sit flat against the skin, but it is not rated for heavy pulling or as a clasp replacement.

