All Wire vs Combination Ultra Mill: Which 130mm Mill Fits?
By Pepetools - Precision Engineered Professional Equipment | Published: 2026-11-03
Category: 비교
Compare the 130mm All Wire Ultra Mill and the 160mm Combination Ultra Mill on frame, shape range, and work style so you pick the right ductile-frame rolling mill.
Quick answer
Choose the Fancy All Wire 130MM ULTRA Mill if your work is wire-led and you need comfort-fit, square, half-round, and full-round profiles in one compact ductile-frame machine. Choose the 160MM Combination Ultra Mill if you want the largest mill in the ULTRA Series and a broader combination format for mixed sheet and wire work.
Why the frame material matters on both mills
Both mills use a ductile housing rather than traditional cast grey iron. Pepetools describes the ductile process as producing a frame that is dense, lightweight, and stronger than grey iron. In practice, that means a machine that stays manageable on the bench while holding its shape under rolling pressure. The trade-off is that ductile framing is a premium construction choice, so you are paying for the frame as much as the rolls.
The All Wire mill pairs that frame with a 130mm format, while the Combination mill uses it to support a 160mm (6.3-inch) body. Neither catalog entry lists roll diameter, gear ratio, or maximum opening, so confirm those specifications with the store before ordering if your workflow depends on them.
Shape range: dedicated wire profiles vs combination flexibility
The All Wire mill is built around wire shapes. Its catalog listing covers square sizes 1–6mm across eight squares, round sizes 1–5mm across five rounds, comfort-fit in five sizes, and half-round in three sizes. That spread lets you move through a wire project without changing machines, which is the main reason to pick it over a general-purpose mill.
The Combination Ultra Mill is described as the largest mill in the ULTRA Series and is positioned as a combination machine. The supplied facts do not itemize its roll profiles, so treat the All Wire model as the safer choice when fancy wire shapes are the priority and the Combination model as the choice when overall capacity and the largest ULTRA format matter more.
Bench footprint and the 130mm question
The title asks which 130mm mill fits, but only the All Wire model is a 130mm machine in this pair. The Combination Ultra Mill is 160mm, which is a larger body. If your bench space is tight or you share a small studio, the 130mm All Wire format is the more compact option. If you have room and want the biggest ULTRA Series mill, the 160mm Combination model is the one to consider.
Price is a secondary signal rather than a verdict: the catalog lists the All Wire mill at USD 923.00 against a USD 1,300.00 comparison price, and the Combination mill at USD 755.37 against USD 1,199.00. Check current pricing and availability before deciding, since these are catalog figures rather than a promise.
Trade-offs to weigh before you buy
- Shape variety vs combination flexibility: The All Wire mill lists specific square, round, comfort-fit, and half-round sizes. The Combination mill is sold as a combination machine but its supplied facts do not itemize profiles. If named wire profiles are your daily work, the All Wire list is the concrete advantage; if you need a general combination format, accept that you are choosing on category rather than a published profile list. Write down the exact wire profiles you use most before comparing.
- Compact 130mm body vs largest ULTRA format: Only the All Wire mill is 130mm in this comparison; the Combination mill is 160mm. A smaller body is easier to place on a crowded bench, while the 160mm machine is the largest in the ULTRA Series. Match the footprint to your actual bench before choosing on capacity alone. Measure your bench space and clearance before ordering.
- Ductile frame on both, different priorities: Both use ductile housings, so the frame is not the deciding difference. The decision comes down to wire profile range versus the larger combination format. If you need both sheet and wire work, confirm the Combination mill's roll profiles with the store, because the catalog facts supplied here do not list them. Ask for the roll profile list if sheet work is part of your plan.
Product facts
- Fancy All Wire 130MM ULTRA Mill with Ductile Frame: Covers square sizes 1–6mm (8 squares), round sizes 1–5mm (5 rounds), comfort fit in 5 sizes, and half round in 3 sizes. A wire-focused jeweler can produce several profile families without switching machines.
Fancy All Wire 130MM ULTRA Mill with Ductile Frame - 160MM Combination Ultra Mill with Ductile Frame: 160mm (6.3-inch) ductile rolling mill and the largest mill in the ULTRA Series. It suits a bench that wants maximum ULTRA capacity and has room for a larger body.
160MM Combination Ultra Mill with Ductile Frame
Which mill fits your bench
Best for
- Wire-focused jewelers who need comfort-fit, square, half-round, and round profiles in one 130mm machine
- Small benches where a compact ductile-frame mill is easier to place
Not for
- Buyers who want the largest ULTRA Series mill and have room for a 160mm body
- Anyone who needs a published combination roll profile list, which the supplied facts do not provide for the 160mm model
