Back to Blog
Buying Guides 2026-11-20 Pepetools - Precision Engineered Professional Equipment 0 views

XRF Gold Jewelry Tester: What It Tests and How to Use

XRF Gold Jewelry Tester: What It Tests and How to Use

Learn what a handheld XRF gold tester measures, its surface-depth limitations, and how to use it for precious metal analysis in jewelry, coins, and watches.

What an XRF Gold Tester Actually Measures

An XRF (X-ray fluorescence) gold tester uses energy-dispersive X-ray fluorescence to identify and measure the elemental composition of a sample's surface. It is a non-destructive alternative to a fire assay, designed for jewelers, pawnshops, appraisers, and precious metal buyers who need fast, on-the-spot analysis of gold, silver, platinum, and other alloys.

The GEMORO XRF Gold & Precious Metal Analyzer is a handheld, portable spectrometer that measures a 4mm diameter area and reaches a depth of 10–20 microns. This is about five times deeper than typical gold plating (1–3 microns), which helps detect plated or counterfeit items. It uses Fundamental Parameters (FP) for analysis, so you do not need to set up individual calibration curves for different elements.

What It Tests and What It Does Not

The GEMORO XRF measures a wide range of precious metal elements including Gold (Au), Silver (Ag), Platinum (Pt), Palladium (Pd), Rhodium (Rh), and many others like Copper (Cu), Zinc (Zn), Nickel (Ni), and Iridium (Ir). It also includes a ROLEX 904L stainless steel identifier and can distinguish between 304 and 316 stainless steel.

However, the device does not measure Aluminum (Al), Magnesium (Mg), or Silicon (Si). Also, because XRF is a surface test, it should not be considered a substitute for a fire assay of a core sample. The plating warning detection feature helps flag counterfeit items, but final verification may require destructive testing for deep-core analysis.

GEMORO XRF Analyzer Key Specifications

  • XRF Gold Jewelry Tester by GEMORO: Measuring area: 4mm diameter; depth: 10–20 microns. This depth is sufficient to detect common plating thicknesses (1–3 microns) and helps identify gold-plated or counterfeit items.
    XRF Gold Jewelry Tester by GEMORO
    XRF Gold Jewelry Tester by GEMORO
  • XRF Gold Jewelry Tester by GEMORO: Uses Fundamental Parameters (FP) for elemental analysis without standards or calibration curves. You can start testing immediately without time-consuming setup for different alloys.
  • XRF Gold Jewelry Tester by GEMORO: Includes a ROLEX 904L stainless steel identifier and can distinguish 304 vs. 316 stainless steel. Useful for authenticating watch cases and bands made from these specific steels.
  • XRF Gold Jewelry Tester by GEMORO: Plating Warning Detection feature helps identify counterfeit items. Adds an extra layer of security when evaluating items that may be plated or fake.

How to Use the GEMORO XRF for Jewelry Testing

To use the GEMORO XRF, first ensure the device is calibrated by applying the manually operated 316 stainless steel shutter included with the unit. This is done at startup and whenever recalibration is desired without sending the device back to the manufacturer.

Position the analyzer so its nose is flat against the item's surface, covering a 4mm diameter area. Initiate a test; typical analysis takes about 10 seconds. The device will display the percentage of each element present on the surface. Use the built-in high-resolution camera to document the sample and results.

For best results, test a clean, flat area of the item. Avoid testing near edges or on curved surfaces that may not make full contact. Remember that results represent surface composition only; for items suspected of being heavily plated or filled, the plating warning feature can assist in detection.

Important Limitations and Trade-offs

While the GEMORO XRF is a powerful tool, it has limitations. It is a surface test, so it cannot measure the core composition of an item. For gold bars or coins that may be tungsten-filled, a fire assay or destructive test may be necessary. The device also does not measure aluminum, magnesium, or silicon, so it cannot identify certain gemstone or alloy components.

The unit is designed for use in temperatures from 10°F to 130°F at a 25% duty cycle. It comes with two rechargeable batteries, each lasting up to 6 hours, and includes an AC adapter and a protective Pelican case. The tube life expectancy is 8,000 hours or about 2.8 million 10-second tests, making it a durable long-term investment for professionals.

Related Articles

Customer Service
Home
Products
Cart
Profile